© 2008 Tony Bartle Ltd

*  full retention separators       

*  bypass separators

*  petroleum forecourt products  

*  water recycling products

*  drainage solutions

*  manhole covers       

*  pollution control products

*  grease traps

*  water storage tanks

*  bespoke design service

Telephone

UK: 01909 725187

Europe: 0044 1909 725187 sales@tonybartle.com

The SUPERCEPTOR Full Retention Separator was designed to comply with the requirements of BSEN858 and appears on the Environment Agency list of compliant products for PPG3.

The SUPERCEPTOR Full Retention Separator was the first UK separator to be fully  tested to the requirements of DIN1999 and subsequently BSEN858. All the flow enters  the main chamber and has to pass through the Coalescing Filter. This action creates a discharge of less than 5mg of oil per litre of water or Class 1.

It is designed specifically for use in areas where there is the possibility of significant spillage of pollutants such as petrol filling stations, lorry fuelling areas, bulk fuel transfer areas etc. and all of the discharge from the area must be intercepted

A full range of ‘standard’ units are available, both with and without separate  integral silt separation,  capable of protecting areas from as little as 800m2 to a massive 66000m2, see ‘Sizing Chart’,  but other tailor made solutions are also available. Why not involve us at the planning stage and we can advise the most economic solution.

To discuss your needs, please complete the enquiry form on our contact page, or telephone:                         

UK 0044 (0) 971 284 3950 or Europe 0033 (0) 498 05 23 83  

For Superceptor sizing chart click here